Get all the updates for this publication
Articles
Comparative studies on Incoloy 800 H weldments exposed to air oxidation at 600 °CPublished in
2013
Volume: 16
In this research work, attempts have been made to study the hot corrosion behavior of Incoloy 800 H weldments subjected to air oxidation at 600 °C. Incoloy 800H samples are being welded using Gas Tungsten Arc welding and Pulsed Current Gas Tungsten Arc welding processes employing ERNiCrMo-3. Hot corrosion studies were performed on the coupons showing the various zones of the weldments. Weight gain or loss measurements were carried out using Thermogravimetric analysis. The corrosion products were revealed using XRD, SEM/EDAX analysis. © 2013 University of Manchester and the authors.
Content may be subject to copyright.
About the journal
| Journal | Journal of Corrosion Science and Engineering |
|---|---|
| ISSN | 14668858 |
Authors (2)
Arivazhagan N- An assessment of hardness, impact strength, and hot corrosion behaviour of friction-welded dissimilar weldments between AISI 4140 and AISI 304
- Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding
- Metallurgical and mechanical properties of laser welded high strength low alloy steel
- Friction Stir Welded Butt Joints of AA2024 T3 and AA7075 T6 Aluminum Alloys
Devendranath Ramkumar K- Effect of pulse density and the number of shots on hardness and tensile strength of laser shock peened, activated flux TIG welds of AISI 347
- Friction Stir Welded Butt Joints of AA2024 T3 and AA7075 T6 Aluminum Alloys
- Hot Corrosion Studies on GTA Welded AISI 304, Monel 400 Subjected to Air Oxidation and Molten Salt Environment
- Hot Corrosion Studies on Bimetallic Combinations of Monel 400 and AISI 304 Subjected to Molten Salt Environment
