Banana fiber is naturally available fiber material in enormous amount which is having good mechanical properties. We can utilize those properties in mechanical field by making highly demanded hybrid composite materials. This work carries the investigation of the Hybrid composite material which is prepared by reinforcing S2 glass fiber, banana fiber using Epoxy resin and hardener. Two different samples are prepared, one of the sample is prepared with treating the banana fiber with NaOH solution and another sample were fabricated without chemical treatment, fabrication is carried out by hand layup technique. The sample is prepared by layer formation and by distributing uniform constant load. Finally, fabricated samples are tested in tensile and flexural strength as per ASTM standards to compare the property of two samples. Finally, the results proved that NaOH treated sample exhibit high tensile strength and high flexural strength. The morphological analysis of SEM images shows that NaOH treated composites have well fined bonding structure and can be used for Engineering Applications. © 2020 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/bync-nd/4.0) Selection and peer-review under responsibility of the scientific committee of ICAMMM 2020.