Get all the updates for this publication
Other
Corrigendum to microstructure characterization and tensile properties of CMT-based wire plus arc additive manufactured ER2594 [materials characterization 169 (2020) 110671] (Materials Characterization (2020) 169, (S1044580320321422), (10.1016/j.matchar.2020.110671))Published in Elsevier Inc.
2021
Volume: 172
The authors regret “The experimental set up shown in Fig. 1 is wrongly provided in the manuscript”. The correct file is provided for your kind reference and attached. The authors would like to apologise for any inconvenience caused. DOI of original article: https://doi.org/10.1016/j.matchar.2020.110671 © 2021 Elsevier Inc.
Postprint Version
Content may be subject to copyright,Check License© This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc... ...© This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/
About the journal
| Journal | Data powered by TypesetMaterials Characterization |
|---|---|
| Publisher | Data powered by TypesetElsevier Inc. |
| ISSN | 10445803 |
Authors (1)
Devendranath Ramkumar K- Effect of pulse density and the number of shots on hardness and tensile strength of laser shock peened, activated flux TIG welds of AISI 347
- Friction Stir Welded Butt Joints of AA2024 T3 and AA7075 T6 Aluminum Alloys
- Hot Corrosion Studies on GTA Welded AISI 304, Monel 400 Subjected to Air Oxidation and Molten Salt Environment
- Hot Corrosion Studies on Bimetallic Combinations of Monel 400 and AISI 304 Subjected to Molten Salt Environment
