Get all the updates for this publication
Journal Article
Effect of Filler Metal’s Choice on the Mechanical and Corrosion Properties of Gas Tungsten Arc Welded AISI 304lPublished in Trans Tech Publications, Ltd.
2012
Volume: 622-623
Pages: 335 - 339
In this research work, an attempt has been made to study the weldability of AISI 304L using filler materials ENiCu-7 and ENiCrMo-3 by Gas Tungsten Arc Welding (GTAW) process. Investigations are carried out on the metallurgical and mechanical properties of AISI 304L weldments. Further, cyclic hot corrosion studies are performed on the various zones of the weldment in air oxidation for 50 cycles at 600 C. Thermogravimetric data is collected at the end of every cycle and the weldments are characterized using XRD analysis.
Content may be subject to copyright.
About the journal
| Journal | Advanced Materials Research |
|---|---|
| Publisher | Trans Tech Publications, Ltd. |
| ISSN | 10226680 |
| Open Access | 0 |
Authors (3)
Devendranath Ramkumar K- Effect of pulse density and the number of shots on hardness and tensile strength of laser shock peened, activated flux TIG welds of AISI 347
- Friction Stir Welded Butt Joints of AA2024 T3 and AA7075 T6 Aluminum Alloys
- Hot Corrosion Studies on GTA Welded AISI 304, Monel 400 Subjected to Air Oxidation and Molten Salt Environment
- Hot Corrosion Studies on Bimetallic Combinations of Monel 400 and AISI 304 Subjected to Molten Salt Environment
Arivazhagan N- An assessment of hardness, impact strength, and hot corrosion behaviour of friction-welded dissimilar weldments between AISI 4140 and AISI 304
- Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding
- Metallurgical and mechanical properties of laser welded high strength low alloy steel
- Friction Stir Welded Butt Joints of AA2024 T3 and AA7075 T6 Aluminum Alloys
Narayanan S- Characterization and catalytic reactivity of mordenite - Investigation of selective oxidation of benzyl alcohol
- Catalytic conversion of polyols (sorbitol and xylitol) to hydrocarbons over hierarchical ZSM-5 zeolite catalysts in a fixed bed reactor
- Hierarchical ZSM-5 catalyst synthesized by a Triton X-100 assisted hydrothermal method
- Enhanced selectivity to benzaldehyde in the liquid phase oxidation of benzyl alcohol using nanocrystalline ZSM-5 zeolite catalyst
