Get all the updates for this publication
Journal Article
Evolution of Microstructures on GTA Welded AISI304 Subjected to Hot Corrosion at 700°C under Na2SO4 + V2O5 (60%)Published in Trans Tech Publications, Ltd.
2012
Volume: 185
Pages: 84 - 86
In this work, an attempt was made to examine the microstructure changes on the gas tungsten arc welded AISI 304 subjected to hot corrosion in Na2SO4+ V2O5(60%) at 700°C under cyclic conditions. It was found that welding of AISI 304 using E308L showed better corrosion resistance and tensile strength as compared to ENiCu-7 filler wire. The corrosion products were analyzed using SEM/EDAX and XRD.
Content may be subject to copyright.
About the journal
| Journal | Solid State Phenomena |
|---|---|
| Publisher | Trans Tech Publications, Ltd. |
| ISSN | 10120394 |
| Open Access | No |
Authors (4)
Senthil Kumar S- A genetic algorithm-based artificial neural network model with TOPSIS approach to optimize the engine performance
- Experimental evaluation of fuzzy controller for magnetorheological damper semi-active suspension system
- Characterisation of Microstructure, Mechanical Properties and Corrosion Behaviour on GTA Welded AISI 310 and Inconel 800
- Development of Acoustic Emission and Motor Current Based Fuzzy Logic Model for Monitoring Weld Strength and Nugget Hardness of FSW Joints
Arivazhagan N- An assessment of hardness, impact strength, and hot corrosion behaviour of friction-welded dissimilar weldments between AISI 4140 and AISI 304
- Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding
- Metallurgical and mechanical properties of laser welded high strength low alloy steel
- Friction Stir Welded Butt Joints of AA2024 T3 and AA7075 T6 Aluminum Alloys
Devendranath Ramkumar K- Effect of pulse density and the number of shots on hardness and tensile strength of laser shock peened, activated flux TIG welds of AISI 347
- Friction Stir Welded Butt Joints of AA2024 T3 and AA7075 T6 Aluminum Alloys
- Hot Corrosion Studies on GTA Welded AISI 304, Monel 400 Subjected to Air Oxidation and Molten Salt Environment
- Hot Corrosion Studies on Bimetallic Combinations of Monel 400 and AISI 304 Subjected to Molten Salt Environment
Narayanan S- Characterization and catalytic reactivity of mordenite - Investigation of selective oxidation of benzyl alcohol
- Catalytic conversion of polyols (sorbitol and xylitol) to hydrocarbons over hierarchical ZSM-5 zeolite catalysts in a fixed bed reactor
- Hierarchical ZSM-5 catalyst synthesized by a Triton X-100 assisted hydrothermal method
- Enhanced selectivity to benzaldehyde in the liquid phase oxidation of benzyl alcohol using nanocrystalline ZSM-5 zeolite catalyst
