Get all the updates for this publication
Book Chapter
Hot Corrosion Studies on Gas Tungsten Arc Welded AISI 304 and AISI 4140 Dissimilar JointsPublished in Springer Berlin Heidelberg
2012
Volume: 330 CCIS
Pages: 436 - 441
Hot corrosion of Gas Tungsten Arc Welded (GTAW) AISI 304 and AISI 4140 dissimilar weldment exposed in air as well as molten salt environment of Na2SO4-60%V2O5 and K2SO4-60% NaCl are discussed. Weight gain studies were done for composite specimens containing both weld metal and heat-affected zone. The results indicated that the specimens were more corroded in molten salt environment as compared to air oxidation. Also weld interface of the samples showed more attack than base metals.
Topics: Gas tungsten arc welding (60)%60% related to the paper, Corrosion (53)%53% related to the paper and Molten salt (51)%51% related to the paper
View more info for "Hot Corrosion Studies on Gas Tungsten Arc Welded AISI 304 and AISI 4140 Dissimilar Joints"
Content may be subject to copyright.
About the journal
| Journal | Data powered by TypesetCommunications in Computer and Information Science Trends in Intelligent Robotics, Automation, and Manufacturing |
|---|---|
| Publisher | Data powered by TypesetSpringer Berlin Heidelberg |
| ISSN | 1865-0929 |
| Open Access | No |
Authors (5)
Arivazhagan N- An assessment of hardness, impact strength, and hot corrosion behaviour of friction-welded dissimilar weldments between AISI 4140 and AISI 304
- Investigation on AISI 304 austenitic stainless steel to AISI 4140 low alloy steel dissimilar joints by gas tungsten arc, electron beam and friction welding
- Metallurgical and mechanical properties of laser welded high strength low alloy steel
- Friction Stir Welded Butt Joints of AA2024 T3 and AA7075 T6 Aluminum Alloys
Devendranath Ramkumar K- Effect of pulse density and the number of shots on hardness and tensile strength of laser shock peened, activated flux TIG welds of AISI 347
- Friction Stir Welded Butt Joints of AA2024 T3 and AA7075 T6 Aluminum Alloys
- Hot Corrosion Studies on GTA Welded AISI 304, Monel 400 Subjected to Air Oxidation and Molten Salt Environment
- Hot Corrosion Studies on Bimetallic Combinations of Monel 400 and AISI 304 Subjected to Molten Salt Environment
Manikandan M- Friction Stir Welded Butt Joints of AA2024 T3 and AA7075 T6 Aluminum Alloys
- Micro-segregation Studies on the Continuous Nd: YAG Laser Beam Welded AISI 316L
- High Temperature Corrosion studies on Pulsed Current Gas Tungsten Arc Welded Alloy C-276 in Molten Salt Environment
- Optimization of the Pulsed Current Gas Tungsten Arc Welding Process Parameters for alloy C-276 using the Taguchi Method
Narayanan S- Characterization and catalytic reactivity of mordenite - Investigation of selective oxidation of benzyl alcohol
- Catalytic conversion of polyols (sorbitol and xylitol) to hydrocarbons over hierarchical ZSM-5 zeolite catalysts in a fixed bed reactor
- Hierarchical ZSM-5 catalyst synthesized by a Triton X-100 assisted hydrothermal method
- Enhanced selectivity to benzaldehyde in the liquid phase oxidation of benzyl alcohol using nanocrystalline ZSM-5 zeolite catalyst
Karthikeyan S- Fabrication, Surface Morphology and Corrosion Investigation of Al 7075-Al2O3 Matrix Composite in Sea Water and Industrial Environment
- Influence of Nickel Coating on Flexural and Dynamic Behaviour of Aluminium
- Performance Characteristics of Corrosion Resistant Black Coatings
- Wear, Hardness and Corrosion Resistance Characteristics of Tungsten Sulfide Incorporated Electroless Ni-P Coatings
