Get all the updates for this publication
Book Chapter
Investigation of Parameters for Machining a Difficult-to-Machine Superalloy: Inconel X-750 and WaspaloyPublished in Springer Singapore
2019
Pages: 199 - 215
Nickel based super alloys has high mechanical strength, resistance to corrosion and oxidation and high temperature strength. Research work on Alloy X-750 and Waspaloy has been infrequent due to difficulties in machining. The present investigation aims to analyze the tool wear, turning forces, and roughness in dry turning of Inconel X-750 and Waspaloy. The experiments are designed using the following parameters: Speed = 50, 75, 100 m/min; rate of feed = 0.05, 0.075, 0.125 mm/rev. The depth of cut was kept at a constant value of 0.5 mm. PVD-coated carbide inserts are used for the turning operation, and the coating material was AlTiN. The cutting forces and surface roughness were measured post the tool wore out. The microstructures and Vickers’ hardness of the superalloys were also studied. Finally, the range of cutting conditions is recommended for machining this alloy in an industrial environment. © Springer Nature Singapore Pte Ltd. 2019.
Topics: Waspaloy (67)%67% related to the paper, Machining (59)%59% related to the paper, Superalloy (59)%59% related to the paper, Inconel (54)%54% related to the paper and Tool wear (53)%53% related to the paper
View more info for "Investigation of Parameters for Machining a Difficult-to-Machine Superalloy: Inconel X-750 and Waspaloy"
Content may be subject to copyright.
About the journal
| Journal | Data powered by TypesetLecture Notes in Mechanical Engineering Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018) |
|---|---|
| Publisher | Data powered by TypesetSpringer Singapore |
| ISSN | 2195-4356 |
| Open Access | No |
Authors (3)
Venkatesan K- Structural and magnetic properties of cobalt-doped iron oxide nanoparticles prepared by solution combustion method for biomedical applications
- Hybrid Aluminium Metal Matrix Composite Reinforced with SiC and TiB2
- Experimental Investigation and Optimization of Machining Parameters using Grey-Relational Analysis Approach and Fuzzy Based Taguchi Loss Function Method
- Fabrication, Surface Morphology and Corrosion Investigation of Al 7075-Al2O3 Matrix Composite in Sea Water and Industrial Environment
Devendiran S- A Gear Fault Identification using Wavelet Transform, Rough set Based GA, ANN and C4.5 Algorithm
- Bearing Fault Diagnosis using Wavelet Packet Transform, Hybrid PSO and Support Vector Machine
- Research on intelligent fault diagnosis of gears using EMD, spectral features and data mining techniques
- Bearing Condition Monitoring Using Tunable Q-Factor Wavelet Transform, Spectral Features and Classification Algorithm
