The conjugate heat transfer due to oblique impingement of two-dimensional, steady state, incompressible, turbulent slot jet on a uniformly heated flat plate has been studied in the present work. The standard high Reynolds number two-equation k - ϵ eddy viscosity model has been used for numerical simulation. The Reynolds number based on the hydraulic diameter of nozzle exit and turbulent intensity maintained at 9, 900 and 2% respectively. The angle of inclination 30°, 45°, 60° and, 75° degrees are considered for the numerical study. A uniform temperature higher than the jet exit temperature is provided to the bottom surface of the plate. The flow field have been studied using the contour plots of pressure and velocity in the fluid domain. The influence of inclination on the distribution of the local Nusselt number over the surface of impingement have been presented. It is found that the angle of impingement influences the flow field and heat transfer characteristics more in the downhill direction of the stagnation zone compared to the uphill direction. © 2018 Author(s).

Devendra Kumar Patel

Department of Thermal and Energy Engineering

School of Mechanical Engineering

Vellore Campus

Shashikant

Kumar J

Kumar V.

Vellore Institute of Technology (VIT) is a private university located in&nbsp;Tamil Nadu, India. Founded in 1984, as Vellore Engineering College, the institution offers 20 undergraduate, 34 postgraduate, four integrated and four research programs. It has campuses in Vellore, Amravati, Bhopal and Chennai.

VIT is one of the top ranked private universities in India according to NIRF, THE and QS Rankings.&nbsp;Govt. of India has recognized&nbsp;VIT, Vellore as an&nbsp;Institution of Eminence. This has allowed VIT to take independent quality initiatives and move up in world ranking.

&nbsp;

&nbsp;

VIT University

Numerical analysis of conjugate heat transfer due to oblique impingement of turbulent slot jet onto a flat plate

AIP Conference Proceedings

In this paper, a dimensionless numerical study of the flow-field and heat transfer characteristics of an incompressible turbulent slot jet impinging obliquely over a moving surface of finite thickness is presented. Simulations were performed using [Formula: see text] eddy viscosity turbulence model. The temperature field was solved simultaneously in the solid and the fluid domain. For a fixed impingement distance and a fixed Reynolds number, the impingement angle ([Formula: see text]) and plate velocity ([Formula: see text]) were varied in the range of 30–75∘ and 0–0.3, respectively. In the results, the length of the potential core depends on the jet inclination, which increases with increase in jet angle. The jet angle and plate velocity have more influence on the uphill side compared to the downhill side. The location of stagnation displaces toward the uphill side as the inclination angle decreases, and the drifting of stagnation point is noted with the variation in plate velocity. The average skin-friction coefficient increases with increase in [Formula: see text] and [Formula: see text], and the influence of [Formula: see text] on the skin-friction coefficient is reduced as [Formula: see text] increases. The maximum Nusselt number ([Formula: see text]) increases with increase in [Formula: see text], and the drifting of [Formula: see text] is observed with increase in plate velocity. It is found that the average Nusselt number increases quickly with increase in plate velocity for lower angles of impingement. The distribution of local heat flux follows the same trend as the local Nusselt number.

International Journal of Modern Physics C

Influence of moving plate velocity on conjugate heat transfer due to the impingement of an inclined slot jet

Journal	AIP Conference Proceedings
Publisher	Author(s)
ISSN	0094243X
Open Access	No