Get all the updates for this publication
Conferences
Investigation of micro burner performance during porous media combustion for surface and submerged flamesPublished in Institute of Physics Publishing
2018
Volume: 370
Issue: 1
Porous media combustion is considered to be one of the popular choice due to its tremendous advantages. Such type of combustion liberates not only super stable flame but also maintains emissions parameters below thresholds level. Present study incorporates reaction and preheat layer with discrete and foam type of materials respectively. Burner was made to run in ultra-lean mode. Optimum equivalence ratio was found out to be 0.7 for surface flame, while 0.6 during submerged flame condition. Maximum thermal efficiency was noted to be 81%. Finally, emissions parameters where recorded continuously to measure NOx and CO, which were under global limits. © Published under licence by IOP Publishing Ltd.
Topics: Combustion (59)%59% related to the paper, Combustor (55)%55% related to the paper and Thermal efficiency (52)%52% related to the paper
View more info for "Investigation of micro burner performance during porous media combustion for surface and submerged flames"
Postprint Version
Content may be subject to copyright.This is an author-created, un-copyedited version of an article accepted for publication/published in IOP Conference Seri... ...This is an author-created, un-copyedited version of an article accepted for publication/published in IOP Conference Series: Materials Science and Engineering. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://doi.org/10.1088/1757-899X/370/1/012049
About the journal
| Journal | IOP Conference Series: Materials Science and Engineering |
|---|---|
| Publisher | Institute of Physics Publishing |
| ISSN | 17578981 |
Authors (1)
Ayub Ahmed Janvekar- A novel failure mode effect and criticality analysis (FMECA) using fuzzy rule-based method: A case study of industrial centrifugal pump
- Automated image analysis and improvisations to manage palm oil plantation
- Effect of chemical treatment on mechanical and water absorption properties of kenaf-glass fibre mat reinforced unsaturated polyester hybrid composites
- Development of foam porous media to undergo surface and submerged flame during premixed combustion
