Vellore Institute of Technology (VIT) is a private university located in&nbsp;Tamil Nadu, India. Founded in 1984, as Vellore Engineering College, the institution offers 20 undergraduate, 34 postgraduate, four integrated and four research programs. It has campuses in Vellore, Amravati, Bhopal and Chennai.

VIT is one of the top ranked private universities in India according to NIRF, THE and QS Rankings.&nbsp;Govt. of India has recognized&nbsp;VIT, Vellore as an&nbsp;Institution of Eminence. This has allowed VIT to take independent quality initiatives and move up in world ranking.

&nbsp;

&nbsp;

VIT University

Department of Physics

Zn 1-x Cd x O thin films have been prepared by sol-gel spin coating method. Structural analysis shows that the Cd substitution into the wutrzite ZnO lattice is achieved up to about 20 mol %. The optical band gap is found to decrease with the increase in Cd content. Increase in the annealing temperature up to a certain critical temperature leads to band gap narrowing because of the proper substitution of Zn by Cd and thereafter the band gap increases due to Cd re-evaporation from the lattice sites. This critical temperature lowers down with the increase in Cd doping concentration. The resistivity decreases with the increase in Cd content and increases with the increase in annealing temperature. © 2015 AIP Publishing LLC.

GENERAL

Department Of Physics

School of Advanced Sciences

Vellore Campus

World University root node

AIP Conference Proceedings

Effect of annealing on structural and optical properties of sol-gel prepared Cd doped ZnO thin films

Fulltext

Nanoscale Research Letters

Performance evaluation of thin film silicon solar cell based on dual diffraction grating

Centre for Bio-Separation and Technology

Department of Digital Communications

School of Information Technology and Engineering

Optik

Growth, crystal perfection, optical and electrical properties of organic crystal: Brucinium 5-sulfosalicylate trihydrate

AIP Advances

Performance enhancement of thin film silicon solar cells based on distributed Bragg reflector & diffraction grating

Background: The purpose of this study was to assess the feasibility of deep inspiration breath-hold (DIBH) based volumetric modulated arc therapy (VMAT) for locally advanced left sided breast cancer patients undergoing radical mastectomy. DIBH immobilizes the tumor bed providing dosimetric benefits over free breathing (FB). Materials and Methods: Ten left sided post mastectomy patients were immobilized in a supine position with both the arms lifted above the head on a hemi-body vaclock. Two thermoplastic masks were prepared for each patient, one for normal free breathing and a second made with breath-hold to maintain reproducibility. DIBH CT scans were performed in the prospective mode of the Varian real time position management (RPM) system. The planning target volume (PTV) included the left chest wall and supraclavicular nodes and PTV prescription dose was 5000cGy in 25 fractions. DIBH-3DCRT planning was performed with the single iso-centre technique using a 6MV photon beam and the field-in-field technique. VMAT plans for FB and DIBH contained two partial arcs (179°-300°CCW/CW). Dose volume histograms of PTV and OAR's were analyzed for DIBH-VMAT, FB-VMAT and DIBH-3DCRT. In DIBH mode daily orthogonal (0° and 90°) KV images were taken to determine the setup variability and weekly twice CBCT to verify gating threshold level reproducibility. Results: DIBH-VMAT reduced the lung and heart dose compared to FB-VMAT, while maintaining similar PTV coverage. The mean heart V30Gy was 2.3% ±2.7, 5.1% ±3.2 and 3.3% ±7.2 and for left lung V20Gy was 18.57% ±2.9, 21.7% ±3.9 and 23.5% ±5.1 for DIBH-VMAT, FB-VMAT and DIBH-3DCRT respectively. Conclusions: DIBH-VMAT significantly reduced the heart and lung dose for left side chest wall patients compared to FB-VMAT. PTV conformity index, homogeneity index, ipsilateral lung dose and heart dose were better for DIBH-VMAT compared to DIBH-3DCRT. However, contralateral lung and breast volumes exposed to low doses were increased with DIBH-VMAT.

VIT Unitversity

Asian Pacific Journal of Cancer Prevention

Feasibility Study of Deep Inspiration Breath-Hold Based Volumetric Modulated Arc Therapy for Locally Advanced Left Sided Breast Cancer Patients

Cr-diffused cadmium telluride (CdTe) thin films with different Cr content were prepared using electron beam evaporation method at a substrate temperature of 373 K followed by annealing at 573 K. The structures, composition, chemical and magnetic properties of the prepared films were studied using appropriate techniques. The X-ray diffraction spectra showed a predominant (1 1 1) reflection corresponding to the zinc blende structure of CdTe. Increase of lattice parameter with increase in Cr content has been observed. The cross-sectional HRSEM images displayed a columnar grain growth in the films. EDAX data exposed the presence of Cr, Cd and Te with near stoichiometry. The Raman spectra revealed emission peaks corresponding to A1, TO and LO modes of CdTe showing gradual shift in peak position and decreased intensity confirming the incorporation of Cr into CdTe host lattice. M–H plots displayed a clear well-defined room temperature ferromagnetic hysteresis loop with increase in Cr content. © 2014, Springer-Verlag Berlin Heidelberg.

Applied Physics A

Structural and Magnetic properties of Cr-diffused CdTe nanocrystalline thin films deposited by electron beam evaporation

Nonlinear optical single crystal of L-Proline trichloroacetate (L-PTCA) was successfully grown by Slow Evaporation Solution Technique (SEST). The grown crystals were subjected to single crystal X-ray diffraction analysis to confirm the structure. From the single crystal XRD data, solid state parameters were determined for the grown crystal. The crystalline perfection has been evaluated using high resolution X-ray diffractometer. The frequencies of various functional groups were identified from FTIR spectral analysis. The percentage of transmittance was obtained from UV Visible spectral analysis. TGA-DSC measurements indicate the thermal stability of the crystal. The dielectric constant, dielectric loss and ac conductivity were measured by the impedance analyzer. The DC conductivity was calculated by the cole-cole plot method.

Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy

Solid state parameters, structure elucidation, High Resolution X-Ray Diffraction (HRXRD), phase matching, thermal and impedance analysis on l-Proline trichloroacetate (l-PTCA) NLO single crystals

Optics & Laser Technology

Dielectric, optical and mechanical studies of phenolic polyene OH1 organic electrooptic crystal

Single crystal of 2-[2-(4-methoxy-phenyl)-vinyl]-1-methylstilbazolium iodide (4MESI) was grown by the slow evaporation method. Single-crystal X-ray diffraction analysis reveals the formation of the title crystal. The density of the grown crystals was measured, and it was compared with theoretically calculated value. The FTIR and powder XRD of 4MESI were performed at room temperature. The different types of proton present in the crystal structure have been confirmed by NMR spectroscopic study. UV-Vis-NIR spectral studies reveal that 4MESI crystals are good optical transparency in the entire visible region. The photoluminescence spectrum of 4MESI shows violet and blue emission. Thermal stability and behavior of the grown crystal have been investigated by TG and DTG analysis. It shows that the grown crystal has melting point at 243°C. Mechanical hardness of the grown crystals was estimated by Vickers microhardness tester. The grown crystals were also characterized by chemical etching and dielectric studies, and the results are discussed in detail. © 2014 Akadémiai Kiadó, Budapest, Hungary.

Journal of Thermal Analysis and Calorimetry

Bulk size crystal growth, spectral, optical, luminescence, thermal, mechanical, and dielectric properties of organic single crystal

Among the various coating techniques, plasma spray coating is an efficient technique to protect the metal surface from the various surface problems like wear and corrosion. The aim of this present work is to design and produce a bilayer coating on the non- toxic commercially pure titanium (denoted as CP-Ti) implant substrate in order to improve the biocompatibility and surface properties. To achieve that, Al 2 O 3 -13 wt%TiO 2 (AT13) and hydroxyapatite (HAP) were coated on CP-Ti implant substrate using plasma spray coating technique. Further, the coated substrates were subjected to various characterization techniques. The crystallite size of coated HAP and its morphological studies were carried out using X-ray diffractometer (XRD) and scanning electron microscopy (SEM) respectively. The wear test on the bilayer (AT13/HAP) coated CP-Ti implant surface was conducted using ball-on-disc tester under SBF environment at 37°C, in order to determine the wear rate and the coefficient of friction. The adhesion strength of the bilayer coated surface was evaluated by micro scratch tester under the ramp load conditions with load range of 14-20 N. The above said studies were repeated on the single layer coated HAP and AT13 implant surfaces. The results reveal that the bilayer (AT13/HAP) coated CP-Ti surface has the improved wear rate, coefficient of friction in compared to single layer coated HAP and AT13 surfaces. © 2014 Elsevier B.V. All rights reserved.

Applied Surface Science

Scratch and wear behaviour of plasma sprayed nano ceramics bilayer Al 2 O 3 -13 wt%TiO 2 /hydroxyapatite coated on medical grade titanium substrates in SBF environment